HB-1
BALL VALVES
API 6D/6DSS/6A
HB-1
Side entry bolted body ball valve
Construction:
Design options:
- Forged body
- Bi-directional
- Anti-blow-out stem design
Design options:
- Soft or metal seated
- Double block and bleed
- SR, DPE (DIB-1) or dual seat (DIB-2) design
- Ambient, low or high temperature service
- Above ground, buried or subsea service
FINITE ELEMENT ANALYSIS
Traditional design procedure is integrated with Finite Element Analysis into the design cycle of our products in order to support continuous improvements in terms of quality, safety, cost effectiveness and reliability.
Structural analyses were performed on the valve components in order to evaluate their strength under high pressure loading and to optimize the design.
Structural analyses were performed on the valve components in order to evaluate their strength under high pressure loading and to optimize the design.
TECHNICAL SPECIFICATIONS
SIZE RANGE & PRESSURE RATINGS
PRODUCT SIZE
From 1 13/16” to 60”
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 15000
From 1 13/16” to 60”
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 15000
TEMPERATURE RANGE
CRYOGENIC TEMPERATURE
down to -196 °C
LOW TEMPERATURE
down to -125°C
HIGH TEMPERATURE
+ 220°C to + 400°C
down to -196 °C
LOW TEMPERATURE
down to -125°C
HIGH TEMPERATURE
+ 220°C to + 400°C
OPERATION
Manual lever, gearbox, actuator
[electric, pneumatic, hydraulic, gas-over-oil actuators]
[electric, pneumatic, hydraulic, gas-over-oil actuators]
MATERIAL SELECTION
BODY
CARBON STEEL
A105
WCB
LCC
LF2
LF3
F60/F65
WCB
LCC
LF2
LF3
F60/F65
STAINLESS STEEL
DUPLEX SS
SUPERDUPLEX SS
NICKEL ALLOYS
TITANIUM
BALL/SEATS
CARBON STEEL
A105
LF2
LF3
F60/F65
LF2
LF3
F60/F65
STAINLESS STEEL
DUPLEX SS
SUPERDUPLEX SS
NICKEL ALLOYS
TITANIUM
STEM
CARBON STEEL
4140
LF3
F60/F65
LF3
F60/F65
STAINLESS STEEL
DUPLEX SS
SUPERDUPLEX SS
NICKEL ALLOYS
TITANIUM
SEATING
SOFT SEATING
RPTFE
NYLON
PEEK
PCTFE
NYLON
PEEK
PCTFE
METAL SEATING
SEALS
SEALS
RPTFE
FKM
HNBR
FFKM
Graphite
FKM
HNBR
FFKM
Graphite
BOLTING
CARBON STEEL
B7/2H
L7/7
B7M/2HM
L7M/7M
L43/7
L7/7
B7M/2HM
L7M/7M
L43/7
STAINLESS STEEL
SUPERDUPLEX SS
NICKEL ALLOYS
TITANIUM
PRODUCT STANDARDS AND CUSTOMER SPECIFIC TESTS
STANDARD TESTS
- HYDROSTATIC SHELL
- HYDROSTATIC SEAT TEST
- LOW PRESSURE GAS TEST
- CAVITY RELIEF TEST
- FUNCTIONAL TEST
- ANTI-STATIC TEST
OPTIONAL TESTS
- TORQUE TEST
- ENDURANCE TEST (CYCLING)
- DRIFT TOOL TEST (IF APPLICABLE)
- HIGH PRESSURE GAS TEST
- DRIVE TRAIN STRENGTH TEST
- FUGITIVE EMISSION TEST
- HIGH TEMPERATURE TEST
- FIRESAFE TEST